|
When you look at the top of a
frame tent, there is no sewing, no sew holes, no thread. Just a
clean, smooth, strong bar welded surface. |
 |
| |
|
|
On
the inside of a frame tent, we sew the straps to a piece of material, then
heat sealed to the tent top. No sewing, no holes. |
 |
| |
|
|
As you can see. Our weldable
webbing is on all sidepole placements. The go all the way up to the
next reinforcement. |
 |
| |
|
|
This machine heat welds the material together. NO sewing on the
seams. |
 |
| |
|
|
This is our web guy fitting. It is 4" x 6" steel that is powder
coated. Very Strong. Big enough for 3 ratchet hooks. |
 |
| |
|
|
All the webbing is brought to the center where it will be attached
to the reinforced "O" Ring. Yes we bring the webbing all the way up
from the sides to the top. |
 |
| |
|
|
Reinforced "O" Rings on our pole tents. |
 |
|
|
|
|
Click
Here to see a video of the
manufacturing process. #1 |
|
|
|
|
|
Click
Here to see a video of the
manufacturing process. #2 |
|
|
|
|
|
|
|
